System 150

Modular Hinge-Down Clip-In Tiles (Concealed Grid)

description
acoustic data
features
project gallery

System Description

SAS System 150 is a range of highly versatile square and rectangular clip-in metal ceiling tiles which offer hinge down access throughout as standard. Supported from the SAS Deep Omega Bar tiles can pivot and slide along the suspension system providing access to large areas of the ceiling void.

System Features

Hinge down access throughout
Precise tile levelling with twin pip arrangement
Closed butt joints with bevelled edges
Secure void, easy access tool required to demount tile
Upward cleaning pressure can be applied to remove stubborn marks without disturbing tile
Concealed Grid System
Minimum 25-year product life expectancy

Access

Access within overall construction depth. Secure void, easy access tool required to demount tile

Standard Module Sizes (mm)

300x300        500x500        750x750
300x600        500x1500
300x900        600x600
300x1200       600x1200
300x1500       610x610

Special sizes are available on request. Please contact for our technical department further details.

Finish

Polyester Powder coated, supplied as standard with a smooth finish; a fine textured finish (SAS FT), anti-bacterial coating (SAS AB) is available. See paint Finish for a full range of options.

Grid System

Clip-in SAS Deep Omega Bar, see System 150 components.

Shape

Tiles can be square, rectangular, triangular or trapezoidal with bevelled edges and vertical sides, incorporating a hinging tab and pip locating detail.

Perforation

Typically supplied with 1522, 1820 or 2516 perforation. See perforations for full details and perforation options.

Integration

Apertures can be formed during manufacuturing for luminaires and other services, see integration for further details.

Weight

Approximately 9kg/m² for 600 x 600mm steel tiles, acoustic pad and SAS Deep Omega Bar suspension system.

Isometric Drawing

Section Drawing

Acoustic Performance Data

	Attenuation	Absorption
	dB	Class
		NRC	αω
Plain tile.	38	N/A
Perforated tile with acoustic fleece.	13	Class C
		0.70	0.65
Perforated tile with 18mm x 80kg/m³ acoustic pad.	30	Class A
		0.85	0.90
Perforated tile with 18mm x 80kg/m³ acoustic pad and steel backing plate. (Note: 600 x 600mm & 750 x 750mm only)	40	Class D
		0.65	0.55
Perforated tile with 18mm x 80kg/m³ acoustic pad and 12.5mm plasterboard. (Note: 600 x 600mm & 750 x 750mm only)	42	Class C
		0.75	0.65

Hinge and Slide Facility The unique design of SAS system 150 allows every full tile to pivot and slide along the grid system. The hinge and slide feature facilitates easy access to large areas of the ceiling void for maintenance; tiles are retained within the ceiling grid avoiding damage and eliminating the need for storage.

Product Integration Luminaires and other services can be integrated with System 150. Modular luminaires can be supported directly from the soffit. Where maximum point loads are exceeded see installation advice the load must be supported independently or from the grid. The SAS pattress system allows the integration of heavier items into the system by distributing the load directly back to the omega bar eliminating the need for complicated support arms. Further details are available from the technical department.

Wide-Spanning Omega Bar The deep Omega bar has a maximum spanning ability of 2000mm. The wide spanning bar requires 25% less primary channels, top fixings and brackets, saving installation time and materials. Suspension centres should be reduced when using high performing dB panels due to the additional weight or where loads are applied to the system.

Bulkhead Closure Panels Bulkhead closure panels enable floating rafts and ceilings to be created using a standard clip in ceiling tile. The height of the closure panels can be manufactured to suit the project requirements. Further details are available from the technical department.

Security Considerations In areas where it is necessary to restrict access to the ceiling void, System 150 offers a security clips that holds the tiles into the supporting grid. This is ideal for airports and other security driven environments, including schools and lavatories. Tiles without security clips can be removed from the ceiling plane by means of an easy access tool.

Project Gallery


						Torre Caja, Madrid SAS International metal ceiling systems have been designed, supplied and installed for the tallest building in Spain, Torre Caja Madrid. > Full Details

		Broadgate Towers, Bishopgate The flagship Reed Smith offices in Broadgate Tower, London, feature bespoke ceiling systems finished in three different shades of red. > Full Details				Mini Showrooms, Nationwide Black reflective metal ceilings from SAS installed Mini showrooms nationwide to create an ‘iconic’ look. > Full Details

		Western Leisure Centre, Cardiff Innovative ceiling solutions for new Western Leisure, Cardiff. > Full Details				IKEA, Edmonton SAS metal ceiling systems were combined with insulation for undercroft car parks at Ikea. > Full Details

		DLR, London City Airport Station, London SAS metal ceiling tiles were chosen for the refurbishment and extension of the existing station in Silvertown. > Full Details				Arsenal, Emirates Stadium, London SAS products including bespoke architectural metalwork were specified for Arsenal’s Emirates Stadium. > Full Details

		City Academy, Bristol Feilden Clegg Bradley's work on the design included SAS metal clip-in modular tiles. > Full Details