-
- metal ceilings defined
- specification criteria
- sector criteria
- metal ceiling systems
- perforation patterns
- trims and perimeters
- trims and perimeters overview
- trims compatibility table
- channel trims
- angle trims, open cell and fibre
- metal tile to plasterboard trims
- bulkhead trims and tee sections
- system 130 to plasterboard trims
- blind box trims
- dry lining trims
- radiused trims defined
- trims & perimeters silhouettes
- trim accessories
- component listings
- installation advice
Door Frames and Handing
Door Handing
Door handing needs to be specified for all single doors in excess of 838mm wide or in excess of 2040mm high where a third or fourth hinge is required.
Handing is required for all pairs of doors when the doors have rebated meeting edges, either vertically or horizontally (door and over panel sets).
A range of aluminium door frames are available from SAS International to integrate with 50mm, 75mm and 100mm partitioning systems. Door frames are available in non-fire rated and 30 minute fire rated.
Door frames are available in a range of standard sizes and are normally supplied in White (RAL 9010), Grey (BS00A05), Silver (RAL 9006) and Standard Satin Anodised finish. Bespoke sizes and other RAL or BS finishes are available on request.
|
Single doors
Left Hand Right Hand
Double doors (equal or unequal pairs)
Left hand opens first Right hand opens first
|
||
Blackfriars Bridge Station:
New Case Study
Current career opportunities within SAS